Intake Air Resonator Removal/Installation

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.

Do the battery removal procedure (see BATTERY REMOVAL AND INSTALLATION ).
Remove the air cleaner (see THROTTLE BODY CLEANING ).
Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION ).
Remove the seal (A).

Fig 1: Seal, Bolts & Intake Air Resonator With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the bolts (B), then remove the intake air resonator (C) from the engine compartment.
Install the parts in the reverse order of removal.
Do the battery installation procedure (see BATTERY REMOVAL AND INSTALLATION ).