Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2014 >> Pilot EX-L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Intake Air System) >> IMT Actuator Replacement

IMT Actuator Replacement

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover (see step 1 on IGNITION COIL REMOVAL/INSTALLATION ).
  2. Disconnect the IMT actuator connector (A).
    Fig 1: IMT Actuator Connector, Bolts, IMT Actuator & O-Ring With Torque Specifications
    G05961474Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the bolts (B) and the IMT actuator (C).
  4. Install the parts in the reverse order of removal with a new O-ring (D).
scientia non olet · About Mike's Workshop Manuals