How to Enter For Self-Diagnostic Function With the Wireless Remote Control
WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to ON (II).
- To run the self-diagnostic, press the remote control buttons in the following order within 2 seconds of each other: the DVD/AUX button first, the AM/FM button second, the →→ button third, and then the AM/FM button fourth. The self-diagnosis begins and the rear display shows the diagnostic menuNOTE: If you take too long to press any of the buttons, you need to cycle the ignition switch to LOCK (0), then back to ON (II), and start again.