Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2014 >> Pilot EX, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Lubrication System) >> Oil Filter Feed Pipe Replacement

Oil Filter Feed Pipe Replacement

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil filter (see ENGINE OIL FILTER REPLACEMENT  ).
  2. Remove the oil filter feed pipe.
    Fig 1: Identifying Oil Filter Feed Pipe
    G05961143Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe, and hold one nut with a wrench, then tighten the other nut.
    Fig 2: Identifying Oil Filter Feed Pipe Nuts
    G05961144Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Apply new engine oil to the oil filter feed pipe threads, then torque the oil filter feed pipe to 34 N.m (3.5 kgf.m, 24 lbf.ft), then remove the nuts from the oil filter feed pipe.
  5. Install the oil filter (see Engine Oil Filter Replacement  ).
scientia non olet · About Mike's Workshop Manuals