Oil Pressure Switch Test
WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the oil pressure switch connector (A) from the engine oil pressure switch (B).
- Check for continuity between the oil pressure switch terminal and the engine (ground). There should be continuity with the engine stopped. There should be no continuity with the engine running.
- Connect the oil pressure switch connector to the oil pressure switch.