DTC P011A: ECT Sensor 1 Circuit Range / Performance Problem
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 Honda Fit, 2019 Honda Fit, 2018 Honda Fit, 2017 Honda Fit, and 2016 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Before you troubleshoot, review the general troubleshooting information - Refer to: HOW TO TROUBLESHOOT THE FUEL AND EMISSIONS SYSTEMS or How to Troubleshoot the CVT System (CVT) .
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| P011A ECT Sensor 1 Circuit Range/Performance Problem |
DTC (PGM-FI)
- Connector visual check:
- 1. Check for poor connections or loose terminals of these connectors.
- ECT sensor 1
- ECT sensor 2
- MAF sensor/IAT sensor 1
Are the connection and terminals OK?
YES
Replace ECT sensor 1 - Refer to: ECT Sensor 1 Removal and Installation or ECT Sensor 2 Removal and Installation .
NO
Repair the connections or terminals, then recheck.