Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2014 >> CR-V EX, 2.4L Eng, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Keyless/Power Door Locks/Security System) >> Security Hood Switch Test

Security Hood Switch Test

WARNING: This page is about a different car, the 2011 Honda CR-V, 2010 Honda CR-V, 2009 Honda CR-V, 2008 Honda CR-V, and 2007 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Disconnect the 2P connector from the hood switch.
    Fig 1: Identifying 2P Connector Terminal Layout
    G06612183Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between the terminals.
    • There should be continuity between terminals No. 1 and No. 2 when the hood is opened (latch released).
    • There should be no continuity between terminals No. 1 and No. 2 when the hood is closed (latch pushed down).
  4. If the continuity is not as specified, replace the hood latch assembly (see HOOD LATCH REPLACEMENT ).
scientia non olet · About Mike's Workshop Manuals