DTC 24-11: Left-Rear Magnetic Encoder Malfunction (Pulse Missing)

• 12 volt battery voltage above 8.5 V

Operating Condition:

• 1.

  Turn the vehicle to the READY TO DRIVE mode.

• 2.

  Test-drive the vehicle at a steady speed of 13 mph (20 km/h) or more for about 30 seconds.

• 1 drive cycle
• ABS indicator on
• VSA indicator on
• Brake system indicator on (If multiple wheel failures are detected)

• Stop ABS function
• Stop VSA function
• Stop TCS function
• Stop brake assist function
• Stop EBD function (If multiple wheel failures are detected)
• Stop engine drag torque control function

• Debris on the hub bearing unit (magnetic encoder) surface
• Hub bearing unit (magnetic encoder) failure