A/C Refrigerant Oil Replacement

Recommended PAG oil: SP-10

P/N 38897-P13-A01 AH: 120 mL (4 fl-oz)

It is important to have the correct amount of refrigerant oil in the A/C system to ensure proper lubrication of the compressor. Too little oil damages the compressor; too much oil reduces the cooling capacity of the system, and can produce high vent temperatures.

• To avoid contamination, do not return the oil to the container once dispensed, and never mix it with other refrigerant oils.
• Immediately after using the oil, reinstall the cap on the container, and seal it to avoid moisture absorption.
• Do not spill the refrigerant oil on the vehicle; it may damage the paint; if it gets on the paint, wash it off immediately.

Add the recommended refrigerant oil in the amount listed if you replace any of the following parts:

A/C condenser (including receiver/dryer).......25 mL (5/6 fl-oz)

Evaporator.............................35 mL (1 1/6 fl-oz)

Line or hose...........................10 mL (1/3 fl-oz)

Receiver/dryer.......................10 mL (1/3 fl-oz)

Leakage repair.......................25 mL (5/6 fl-oz)

A/C compressor.........Because this compressor is equipped with on oil separator, oil drainage is unnecessary at the time of compressor replacement.