Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2012 >> Ridgeline RTL >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating/Air Conditioning >> Air Mix Control Motor Replacement

Air Mix Control Motor Replacement

  1. Remove the driver's dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
  2. Remove the self-tapping screws and the duct (A).
    Fig 1: Identifying Self-tapping Screws And Duct
    G05968436Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the 7P connector (A) from the air mix control motor (B). Remove the self-tapping screws and the air mix control motor from the heater unit.
    Fig 2: Identifying Air Mix Control Motor And 7P Connector
    G05968437Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make sure the motor runs smoothly.
scientia non olet · About Mike's Workshop Manuals