Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2012 >> Odyssey EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Engine Control System / Engine Mechanical - Service, Testing And Troubleshooting) >> Repair Procedures And Tests >> Liquid Gasket Applying Procedure >> Procedure

Liquid Gasket Applying Procedure: Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2025 Honda Odyssey, 2024 Honda Odyssey, 2023 Honda Odyssey, 2022 Honda Odyssey, and 2021 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Liquid Gasket - Apply

    1. Apply liquid gasket as shown.

    NOTE: 

    • Remove all of the old liquid gasket of the mating surfaces of each part and clean.
    • Apply liquid gasket (P/N 08718-0003, 08718-0004, or 08718-0009). Install the component within 5 minutes of applying the liquid gasket.
    • If too much time has passed after applying the liquid gasket, remove the old liquid gasket and residue, then reapply new liquid gasket.
    • Wait at least 30 minutes before filling the engine with oil.
    • Do not run the engine for at least 3 hours after installing the parts.
    GHH443989Courtesy of HONDA, U.S.A., INC.
    GHH443990Courtesy of HONDA, U.S.A., INC.
scientia non olet · About Mike's Workshop Manuals