Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2012 >> Odyssey EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Starting System - Service Information) >> Removal & Installation Test >> Engine Start/Stop Switch Removal, Installation, and Test >> Test

Engine Start/Stop Switch Removal, Installation, and Test: Test

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2025 Honda Odyssey, 2024 Honda Odyssey, 2023 Honda Odyssey, 2022 Honda Odyssey, and 2021 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engine Start/Stop Switch - Test

    1. Check the switch according to the table.

    NOTE:
    • When an LED is located between terminals, check if the LED illuminates by connecting power and ground to the LED.
    • Note this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).
    GHH447940Courtesy of HONDA, U.S.A., INC.
    GHH447941Courtesy of HONDA, U.S.A., INC.

    2. If the result is not as specified, replace the engine start/stop switch (A).

    LF Antenna Test 

    3. Check for continuity between the terminals according to the table. There should be continuity.

    GHH447942Courtesy of HONDA, U.S.A., INC.

    4. If the continuity is not as specified, replace the engine start/stop switch.