DTC B1602 (Keyless Access Power Control Unit) (2025)
DTC B1602 : BCM Internal Error (EEPROM Error)
NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A - Refer to: BODY ELECTRICAL TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE 1 AND TEST MODE 2 (WITHOUT THE HDS) or BODY ELECTRICAL TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A - INITIAL COMMUNICATION AND DTC CHECKS or BODY ELECTRICAL TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE B - CONTROL UNIT NOT COMMUNICATING .
| DTC Description | DTC |
|---|---|
| B1602 BCM Internal Error (EEPROM Error) |
DTC (Power Control Unit)
- Problem verification
-1. Clear the DTCs with the HDS.
-2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.
-3. Check for DTCs with the HDS.
DTC Description DTC B1602 BCM Internal Error (EEPROM Error) Is DTC B1602 indicated?
YES
Replace the body control module BODY CONTROL MODULE REMOVAL AND INSTALLATION .
NO
Intermittent failure, the system is OK at this time.