Front Mode Control Motor Replacement: Removal

NOTE: Set the HVAC control to the VENT position before removing the motor.

Fig 1: Identifying HVAC Control VENT Position

Courtesy of AMERICAN HONDA MOTOR CO., INC.

1. Remove the headlight leveling control unit (see HEADLIGHT LEVELING CONTROL UNIT INPUT TEST/REPLACEMENT ).
2. Disconnect the 7P connector (A) from the front mode control motor (B), then remove the self-tapping screws and the front mode control motor from the heater unit.
   Fig 2: Identifying Front Mode Control Motor With Connector

   Courtesy of AMERICAN HONDA MOTOR CO., INC.