Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2012 >> Insight Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Precautions and Procedures >> Spring-Loaded Lock Connector >> Front Airbag Connectors >> Disconnecting

Front Airbag Connectors: Disconnecting

To release the lock, pull the spring-loaded sleeve (A) toward the stop (B) while holding the opposite half of the connector, then pull the connector halves apart. Be sure to pull on the sleeve and not on the connector.

Fig 1: Disconnecting Spring-Loaded Lock Connector
G08095313Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About Mike's Workshop Manuals