Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2012 >> Fit Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission) >> Torque Converter Housing >> Lubrication Check Valve Replacement

Lubrication Check Valve Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Remove the sealing bolt (A) and the sealing washer (B).
    Fig 1: Removing Sealing Bolt And Sealing Washer With Torque Specifications
    G06768651Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the lubrication check valve (C) from the torque converter housing (D).
  3. Install the lubrication check valve, a new sealing washer, and the sealing bolt.
scientia non olet · About Mike's Workshop Manuals