Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2012 >> Fit Base, Automatic Trans >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance Reminder Light (Reset Procedures) >> Tire Pressure Monitor System Reminder >> TPMS Reminder Reset - Procedure 07 >> Calibration - Models Without ACC

Calibration - Models Without ACC

  1. Make sure the tires are inflated to the specified tire pressure listed on the doorjamb label. Vehicle must be stopped with the transmission in neutral (M/T) or P or N (A/T, CVT).
  2. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.
  3. Press the TPMS switch (lower dash, left of steering wheel) for 3 seconds.
  4. When the calibration successfully begins, the TPMS indicator (instrument cluster, center left) blinks twice.
  5. Calibration is completed after driving 31 to 62 mph (50 to 100 km/h), steadily without much acceleration or deceleration for about 30 minutes.
scientia non olet · About Mike's Workshop Manuals