Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2012 >> Fit Base, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> EVAP System >> EVAP Canister Vent Shut Valve Replacement

EVAP Canister Vent Shut Valve Replacement

  1. Remove the EVAP canister assembly (see EVAP CANISTER REPLACEMENT  ).
  2. Remove the hose (A), and disconnect the EVAP canister vent shut valve connector (B).
    Fig 1: Hose, EVAP Canister Vent Shut Valve, Connector & Canister Bracket With Torque Specifications
    G05953278Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the EVAP canister vent shut valve (C) from the canister bracket (D).
  4. Install the parts in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals