Oil Filter Feed Pipe Replacement
- Remove the oil filter (see ENGINE OIL FILTER REPLACEMENT
).
- Remove the oil filter feed pipe.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Install two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe, and hold one nut with a wrench, then tighten the other nut.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Apply new engine oil to the oil filter feed pipe threads, then torque the oil filter feed pipe to 34 N.m (3.5 kgf.m, 24 lbf.ft), then remove the nuts from the oil filter feed pipe.
- Install the oil filter (see Engine Oil Filter Replacement
).