Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2011 >> Fit Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Navigation System) >> DTC Troubleshooting >> DTC 2610: DRAM Diag

DTC 2610: DRAM Diag

WARNING: This page is about a different car, the 2013 Honda Fit and 2012 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Check the vehicle battery condition first BATTERY TEST
  • This navigation DTC sets when a problem with the internal DRAM is detected (the ECU info icon is red in the System Links).
  • Check any official Honda service website for more service information about the navigation system.
  • Before you troubleshoot, make sure to follow the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION  ).
  1. Clear the hard error code (see HOW TO CLEAR ERROR HISTORY  ).
  2. Turn the ignition switch to LOCK (0), and then back to ON (II).
  3. Check for the hard error code (see HOW TO CHECK ERROR HISTORY (NAVIGATION DTCS)  ).

    Is DTC 2610 indicated? 

    YES  -Replace the audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION  ).

    NO  -Intermittent failure, the system is OK at this time.