DTC 1402: Audio Error 2
NOTE:
- Check the vehicle battery condition first.
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow GENERAL TROUBLESHOOTING INFORMATION .
- Clear the hard error code (see HOW TO CLEAR ERROR HISTORY ).
- Turn the ignition switch to LOCK (0), and then back to ON (II).
- Check for the hard error code (see How to Check Error History
).
Is DTC 1402 indicated?
YES - Replace the audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION ).
NO - Intermittent failure, the system is OK at this time.