Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2009 >> S2000 Base >> Repair and Diagnosis >> Brakes >> Traction Control >> VSA (Vehicle Stability Assist) System Components >> DTC Troubleshooting >> DTC 66: VSA Pressure Sensor (Inside of VSA Modulator-control Unit)

DTC 66: VSA Pressure Sensor (Inside of VSA Modulator-control Unit)

  1. Turn the ignition switch to ON (II).
  2. Clear the DTC with the HDS.
  3. Test-drive the vehicle.
    NOTE: Drive the vehicle on the road, not on a lift.
  4. Check for DTCs with the HDS.

    Is DTC 66 indicated? 

    YES  -Replace the VSA modulator-control unit (see VSA MODULATOR-CONTROL UNIT REMOVAL AND INSTALLATION ).

    NO  -The system is OK at this time.

scientia non olet · About Mike's Workshop Manuals