Selector Control Shaft Oil Seal Replacement

Special Tools Required 

• Driver handle, 15 x 135L 07749-0010000
• Oil seal driver attachment 07947-ZV00100

1. Remove the oil seal (A) from the torque converter housing (B).
   Fig 1: Identifying Oil Seal And Torque Converter Housing

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install a new oil seal (A) in the torque converter housing to a depth (B) of 0.5-1.5 mm (0.02-0.06 in.) below the torque converter housing surface using the driver handle and the oil seal driver attachment.

Fig 2: Identifying Oil Seal

Courtesy of AMERICAN HONDA MOTOR CO., INC.