DTC 26: Lateral Acceleration Sensor (Sensor Unit)
- Check for DTCs with the HDS (see HOW TO RETRIEVE DTCS
).
Are DTC 91 or 92 indicated with DTC 26 at the same time?
YES -Troubleshoot DTC 91 or 92, and recheck.
NO -Go to step 2.
- Turn the ignition switch OFF.
- Substitute a known-good yaw rate-lateral acceleration sensor (see STEERING ANGLE SENSOR CENTER POINT WRITING ).
- Clear the DTCs with the HDS (see HOW TO RETRIEVE DTCS ).
- Turn the ignition switch OFF, then turn it ON (II).
- Check for DTCs with the HDS (see HOW TO RETRIEVE DTCS
).
Does the VSA indicator come on, and is DTC 26 indicated?
YES -Replace the VSA modulator-control unit (see VSA MODULATOR-CONTROL UNIT REMOVAL AND INSTALLATION ).
NO -Replace the original yaw rate-lateral acceleration sensor (see STEERING ANGLE SENSOR CENTER POINT WRITING ).