XM Receiver Connector for Inputs and Outputs

When replacing a XM receiver connector, match the wires to the cavities listed in the following tables.

Fig 1: Identifying XM Receiver Connectors

Courtesy of AMERICAN HONDA MOTOR CO., INC.

XM RECEIVER CONNECTOR A (14P) With navigation

XM RECEIVER CONNECTOR FOR INPUTS AND OUTPUTS

Cavity

Wire

Connect to

WHT/RED

Constant power

ORN

CD changer (SAT SYSTEM ACC)

BRN⁽¹⁾

Navigation unit (SAT BUS (GA-NET) shield)

WHT

CD changer (SAT R+)

RED

CD changer (SAT L+)

WHT/RED

Constant power

BLU

Navigation unit (SAT BUS+(GA-NET))

A10

PNK

Navigation unit (SAT BUS- (GA-NET))

A11

BLK

Ground(G501)

A13

BLK

CD changer (SAT R-)

A14

GRN

CD changer (SAT L-)

⁽¹⁾	The shielded wires have a heat-shrunk tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.

XM RECEIVER CONNECTOR A (14P) Without navigation

XM RECEIVER CONNECTOR FOR INPUTS AND OUTPUTS

Cavity

Wire

Connect to

WHT/RED

Constant power

ORN

Audio unit (SAT SYSTEM ACC)

BRN⁽¹⁾

Audio unit (SAT BUS (GA-NET) shield)

WHT

Audio unit (SAT R+)

RED

Audio unit (SAT L+)

WHT/RED

Constant power

BLU

Audio unit (SAT BUS+ (GA-NET))

A10

PNK

Audio unit (SAT BUS- (GA-NET))

A11

BLK

Ground (G501)

A13

BLK

Audio unit (SAT R-)

A14

GRN

Audio unit (SAT L-)

⁽¹⁾	The shielded wires have a heat-shrunk tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.

XM RECEIVER CONNECTOR B (2P) With or Without navigation ('06 model)

XM RECEIVER CONNECTOR B (2P) TERMINALS DESCRIPTION

Cavity	Wire	Connect to
B1	-	Terrestrial signal antenna
B2	-	Satellite signal antenna

XM RECEIVER CONNECTOR B (2P) With or Without navigation ('07-08 models)

XM RECEIVER CONNECTOR B (2P) TERMINALS DESCRIPTION

Cavity	Wire	Connects to
B1	-	XM antenna (SAT/TER)
B2	-	XM antenna (SAT/TER SH)