Pre-Alignment Checks

For proper inspection and adjustment of the wheel alignment, do these checks:

1. Release the parking brake to avoid an incorrect measurement.
2. Make sure the suspension is not modified.
3. Check the tire size and tire pressure.

   Tire size: P235/70R16 104S 

   Tire pressure: 220 kPa (2.2 kgf/cm ²  , 32 psi), cold 

4. Check the runout of the wheels and tires.
5. Check the suspension ball joints. (Hold a wheel with your hands, and move it up and down and right and left to check for wobbling.)
   Fig 1: Checking Suspension Ball Joints

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
6. Bounce the vehicle several times to stabilize the suspension.