Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2007 >> Odyssey Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Tire Pressure Monitoring System (Except Touring)) >> Symptom Troubleshooting >> TPMS Control Unit Replacement

TPMS Control Unit Replacement

WARNING: This page is about a different variant/trim than selected.
NOTE: Make sure the TPMS control unit mounting bracket is not bent or twisted as this may affect its communication with and the tire pressure sensors.
  1. Turn the ignition switch to LOCK (0).
  2. Remove the headliner ( HEADLINER REMOVAL/INSTALLATION ).
  3. Disconnect the TPMS control unit connectors (A).
    Fig 1: TPMS Control Unit Connectors With Torque Specification
    G05525260Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the TPMS control unit (B) from the bracket (C).
  5. Install the TPMS control unit in the reverse order of removal.
  6. Connect the HDS and memorize the tire pressure sensor IDs using the TPMS sensor initializer tool (see Memorizing the Tire Pressure Sensor ID  ).
scientia non olet · About Mike's Workshop Manuals