Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2007 >> Fit Base, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating/Air Conditioning >> Receiver/Dryer Desiccant Replacement

Receiver/Dryer Desiccant Replacement

  1. Remove the A/C condenser (see A/C CONDENSER REPLACEMENT ).
  2. Remove the mount (A) and the cap (B) from the bottom of the A/C condenser, then remove the O-rings (C), the filter (D) and the desiccant (E).
    Fig 1: Identifying A/C Condenser Mount And Cap
    G05456521Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the desiccant in the reverse order of removal, and note these items:

    Replace the O-rings with new ones, and apply a thin coat of refrigerant oil (SP-10) before installing them. Be sure to use the right O-rings for HFC-134a (R-134a) to avoid leakage.

scientia non olet · About Mike's Workshop Manuals