Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2007 >> Fit Base, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating/Air Conditioning >> Heater-A/C Control Panel Disassembly and Reassembly

Heater-A/C Control Panel Disassembly and Reassembly

  1. Remove the heater-A/C control panel (see HEATER-A/C CONTROL PANEL REMOVAL/INSTALLATION ).
  2. Remove the heater fan switch (A), the air mix control cable (B), the mode control cable (C), and the recirculation control cable (D).
    Fig 1: Identifying Heater Fan Switch, Air Mix Control, Mode Control And Recirculation Control Cables
    G05456494Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Widen the cable stops (A) in the cable holder (B) using a snap ring pliers, then pull out the control cable (C).
    Fig 2: Identifying Cable Stops, Cable Holder And Control Cable
    G05456495Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Hook the tip of the new control cable to the lever or slider, then push the cable housing into the cable holder until it locks into place.
  5. After assembly, check that the lever slides or the dial turns smoothly through the full stroke from right to left.
scientia non olet · About Mike's Workshop Manuals