Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2007 >> Fit Base, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating System >> Heater Control Panel Disassembly and Reassembly

Heater Control Panel Disassembly and Reassembly

  1. Remove the heater control panel (see HEATER CONTROL PANEL REMOVAL/INSTALLATION ).
  2. Remove the heater fan switch (A), the air mix control cable (B), the mode control cable (C), and the recirculation control cable (D).
    Fig 1: Identifying Heater Fan Switch, Air Mix Control, Mode Control, And Recirculation Control Cables
    G05456444Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Expand the cable stops (A) in the cable holder (B) using snap ring pliers, then pull out the control cable (C).
    Fig 2: Removing Control Cable
    G05456445Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Hook the tip of the new control cable to the lever, then push the cable housing into the cable holder until it locks into place.
  5. After assembly, check that the lever slides and the dial turns smoothly through the full stroke from right to left.
scientia non olet · About Mike's Workshop Manuals