Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2007 >> Fit Base, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating System >> Blower Resistor Test

Blower Resistor Test

  1. Disconnect the 4P connector from the blower resistor.
  2. Measure the resistance between the following terminals of the blower resistor and compare them with the values in Fig 1.
    Fig 1: Measuring Resistance Between Blower Resistor Terminals
    G05456456Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. If the resistance is not within the specifications, replace the blower resistor.
scientia non olet · About Mike's Workshop Manuals