Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2007 >> Fit Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Engine Control System (1GR-FE)) >> Mass Air Flow Meter >> Removal

Mass Air Flow Meter: Removal

WARNING: This page is about a different car, the 2007 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE V-BANK COVER  (See REMOVAL  )
  3. REMOVE MASS AIR FLOW METER 
    1. Disconnect the connector.
    2. Remove the 2 screws, then remove the mass air flow meter.
      Fig 1: Removing Mass Air Flow Meter
      G05197997Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals