Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2007 >> Fit Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Engine Control System (1GR-FE)) >> Mass Air Flow Meter >> Inspection

Mass Air Flow Meter: Inspection

WARNING: This page is about a different car, the 2007 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT MASS AIR FLOW METER 
    1. Perform a visual check for any foreign matter on the platinum hot wire (heater) of the mass air flow meter shown in the illustration.

      OK: 

      There is no foreign material. 

      If the result is not as specified, replace the mass air flow meter.

    2. Fig 1: Inspecting Mass Air Flow Meter
      G05197998Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002