Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2007 >> Fit Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wipers/Washers >> Wiper Blade Replacement

Wiper Blade Replacement

  1. Pull up the wiper arms from the windshield.
  2. Push the tab (A) and remove the wiper blade (B) from the wiper arm (C).
    Fig 1: Identifying Tab And Wiper Arm Blade
    G05456696Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Find the side of the blade labeled "LOCK" (A), then pull back the end of the blade and slide out the old rubber (B).
    Fig 2: Removing Old Rubber
    G05456697Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install a new rubber in the reverse order of removal.
  5. Install the wiper blades onto the windshield wiper arms in the reverse order of removal.
  6. Test by turning on the wipers. If the blades slip, turn off the wipers and seat the attachments more firmly.
scientia non olet · About Mike's Workshop Manuals