Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2007 >> Civic GX >> Repair and Diagnosis >> Engine Performance >> System >> Fuel System & Emissions System (R18A1 Engine) >> General Troubleshooting Information >> CKP Pattern Clear/CKP Pattern Learn >> Learn Procedure (without the HDS)

Learn Procedure (without the HDS)

  1. Start the engine. Hold the engine speed at 3,000 RPM without load (AT/in P or N, M/T in neutral) until the radiator fan comes on.
  2. Test-drive the vehicle on a level road: Decelerate (with the throttle fully closed) from an engine speed of 2,500 RPM down to 1,000 RPM with the A/T in 2, or M/T in 1st.
  3. Test-drive the vehicle on a level road: Decelerate (with the throttle fully closed) from an engine speed of 5,000 RPM down to 3,000 RPM with the A/T in 2, or M/T in 1st.
  4. Repeat step  2 and  3 several times.
  5. Turn the ignition switch to LOCK (0).
  6. Turn the ignition switch to ON (II), and wait 30 seconds.
scientia non olet · About Mike's Workshop Manuals