Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2007 >> Accord Base, Standard, APG7 >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Electronic Throttle Control System (Except Hybrid & V6) >> Throttle Actuator Control Module Replacement

Throttle Actuator Control Module Replacement

  1. Remove the right kick panel; 2-door (see 2-DOOR - DOOR SILL AREA ), 4-door (see 4-DOOR - FRONT DOOR SILL AREA ).
  2. Disconnect the throttle actuator control module 16P connector (A).
    Fig 1: Disconnecting Throttle Actuator Control Module 16P Connector
    G03646684Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the bolts (B) and the throttle actuator control module (C).
  4. Install the control module in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals