Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2006 >> Ridgeline RT >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System >> Symptom Troubleshooting >> OPEN/CLOSE function of the display does not work

OPEN/CLOSE function of the display does not work

  1. Turn the ignition switch OFF.
  2. Disconnect the navigation display connector B (10P) and CD changer connector A (18P).
  3. Check for continuity between navigation display connector B (10P) terminal No. 10 and body ground.
    Fig 1: Checking Continuity Between Navigation Display Connector B (10P) Terminal No. 10 And Body Ground
    G05593250Courtesy of AMERICAN HONDA MOTOR CO., INC.

    Is there continuity? 

    YES  - Repair short in the wire between navigation display connector B (10P) terminal No. 10 and CD changer connector A (18P) terminal No. 4.

    NO  - Go to step 4.

  4. Substitute a known-good navigation display, and check to see if the display opens and closes normally.

    Does the display work normally? 

    YES  - Replace the navigation display (see NAVIGATION DISPLAY REMOVAL/INSTALLATION  ).

    NO  - Replace the CD changer (see AUDIO DISC CHANGER REMOVAL/INSTALLATION ).

scientia non olet · About Mike's Workshop Manuals