Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2006 >> Civic Si >> Repair and Diagnosis >> Engine Performance >> System >> Intake Air System (K20Z3 Engine) >> Air Cleaner Element Inspection/Replacement

Air Cleaner Element Inspection/Replacement

  1. Open the air cleaner housing cover (A).
    Fig 1: Identifying Air Cleaner Housing Cover, Air Cleaner Element And Air Cleaner Housing
    G04666157Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the air cleaner element (B) from the air cleaner housing (C).
  3. Check the air cleaner element for damage or clogging. If there is damage or clogging, replace the air cleaner element.
    NOTE: Do not use compressed air to clean the air cleaner element.
  4. Install the parts in the reverse order of removal. Clean and remove any debris from inside the air cleaner housing.
  5. If the maintenance minder required to replace the air cleaner element, reset the maintenance minder (see MAINTENANCE MINDER ).
    • If you did not replace the air cleaner element, this procedure is complete.
    • If the maintenance minder required air cleaner element replacement, reset the maintenance minder. (see MAINTENANCE MINDER ).
    • If you replaced the air cleaner element, reset the ECM with the HDS, and do the ECM idle learn procedure (see ECM IDLE LEARN PROCEDURE ).
scientia non olet · About Mike's Workshop Manuals