DTC P0461: Fuel Level Sensor (Fuel Gauge Sending Unit) Circuit Range/Performance Problem
NOTE:
Because it requires 162 miles (260 km) to drive without refueling to complete this diagnosis, DTC P0461 cannot be duplicated during this troubleshooting.
- Test the fuel gauge sending unit (see FUEL GAUGE SENDING UNIT TEST
).
Is the fuel gauge sending unit OK?
- YES - Check for poor connections or loose terminals at the fuel gauge sending unit and the gauge assembly.
- NO - Replace the fuel gauge sending unit (see FUEL PUMP/FUEL GAUGE SENDING UNIT REPLACEMENT ), then go to step 2.
- Turn the ignition switch ON (II).
- Reset the PCM with the HDS.
- Do the PCM idle learn procedure (see PCM IDLE LEARN PROCEDURE ).
- Check for Temporary DTCs or DTCs with the HDS.
Are any Temporary DTCs or DTCs indicated?
- YES - If DTC P0461 is indicated, check for poor connections or loose terminals at the fuel gauge sending unit and the gauge assembly, then go to step 1 If any other Temporary DTCs or DTCs are indicated, go to the indicated DTC's troubleshooting.
- NO - Troubleshooting is complete.