Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2004 >> Element DX, 2.4 YH2, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transmission >> M/T Transfer Assembly >> Transfer Assembly Reassembly >> Outline of Assembly

Outline of Assembly

  1. Select the 35 mm thrust shim. Do this procedure if the transfer driven gear shaft or the tapered roller bearing on the transfer driven gear shaft is replaced.
  2. Preassemble the parts to check and adjust transfer gear backlash and transfer gear tooth contact.
  3. Disassemble the parts, then assemble the transfer driven gear shaft and its related parts.
  4. Measure and adjust the starting torque of the transfer driven gear shaft tapered roller bearing.
  5. Assemble the transfer shaft and its related parts.
  6. Measure and adjust the total starting torque.
scientia non olet · About Mike's Workshop Manuals