Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2003 >> Odyssey EX >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating/Air Conditioning System >> Mode Control Motor Replacement

Mode Control Motor Replacement

  1. Disconnect the 7P connector (A) from the mode control motor (B). Remove the rods (C) of the mode control motor from the mode control motor linkage (D) and the mode control linkage (E). Remove the self-tapping screws and the mode control motor from the heater unit.
    Fig 1: Disconnecting 7P Connector From Mode Control Motor
    G01519982Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the motor in the reverse order of removal. After installation, make sure the motor runs smoothly.
scientia non olet · About Mike's Workshop Manuals