Max Cool Position Function
WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
When the mode control dial is in the MAX A/C position, the A/C control panel will automatically select the recirculation mode and turn the A/C on. The recirculation switch and A/C switch are disabled and cannot be turned off in this mode. If the A/C control panel fails to function as described, replace it.
DTC (RECIRCULATION INDICATOR BLINKS) REFERENCE
| DTC (Recirculation Indicator Blinks) | Detection Item |
|---|---|
| 1 | An open in the air mix control motor circuit |
| 2 | A short in the air mix control motor circuit |
| 3 | A problem in the air mix control linkage, door, or motor |
| 4 | An open or short in the mode control motor circuit |
| 5 | A problem in the mode control linkage, doors, or motor |
| 6 | A problem in the blower motor circuit |
| 9 | An open in the rear air mix control motor circuit |
| 10 | A short in the rear air mix control motor circuit |
| 11 | A problem in the rear air mix control linkage, door, or motor |
| 12 | An open in the rear mode control motor circuit |
| 12 | An open in the rear mode control motor circuit |
| 13 | A short in the rear mode control motor circuit |
| 14 | A problem in the rear mode control linkage, doors, or motor |
| 15 | A problem in the rear blower motor circuit |
DTC (A/C INDICATOR BLINKS) REFERENCE
| DTC (A/C Indicator Blinks) | Detection Item |
|---|---|
| 7 | An open in the evaporator temperature sensor circuit |
| 8 | A short in the evaporator temperature sensor circuit |
In case of multiple problems, the recirculation indicator will indicate only the DTC with the least number of blinks.