DTC B1357: Power Tailgate Control Unit Lost Communication with Gauge Control Module (VSP/NE Message)
WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A
).
- Clear the DTCs with the HDS.
- Turn the ignition switch OFF, and then back ON (II).
- Check for DTCs with the HDS.
Is DTC B1357 indicated?
- YES - Go to step 4.
- NO - Intermittent failure. The power tailgate system is OK at this time. Check for loose or poor connections at the power tailgate control unit connector and at the MICU connector.
- Check for the DTCs with the HDS.
Are DTCs B1060, B1205, B1805, B2010, and B2060 also indicated?
- YES - Go to the gauge control module input test (see GAUGE CONTROL MODULE INPUT TEST ).
- NO - Replace the power tailgate control unit.