Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2002 >> Insight Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Power Sliding Doors) >> DTC Troubleshooting >> DTC B2010: Left Power Sliding Door Control Unit Lost Communication with Gauge Control Module (VSP/NE Message)

DTC B2010: Left Power Sliding Door Control Unit Lost Communication with Gauge Control Module (VSP/NE Message)

WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).
  1. Clear the DTCs with the HDS.
  2. Turn the ignition switch OFF, and then back ON (II).
  3. Wait for 6 seconds or more.
  4. Check for DTCs with the HDS.

    Are DTCs B1060, B1205, B1357, B1805, B2010, and B2060 indicated? 

    1. YES  - Go to gauge control module input test (see GAUGE CONTROL MODULE INPUT TEST ).
    2. NO  - Go to left power sliding door control unit input test (see LEFT POWER SLIDING DOOR  ).
scientia non olet · About Mike's Workshop Manuals