Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2000 >> S2000 >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (VTEC) >> Rocker Arm Oil Pressure Switch (VTEC Oil Pressure Switch) Removal/Installation

Rocker Arm Oil Pressure Switch (VTEC Oil Pressure Switch) Removal/Installation

WARNING: This page is about a different car, the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, and 2006 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the rocker arm oil pressure switch (VTEC oil pressure switch) 2P connector (A).
    Fig 1: Disconnecting Rocker Arm Oil Pressure Switch 2P Connector With Torque Specifications
    G03693205Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the rocker arm oil pressure switch (VTEC oil pressure switch) (B).
  3. Install the rocker arm oil pressure switch (VTEC oil pressure switch) in the reverse order of removal with a new O-ring (C).
scientia non olet · About Mike's Workshop Manuals