Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2000 >> S2000 >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (VSA (Vehicle Stability Assist) System Components) >> DTC Troubleshooting >> DTC 105: Hydraulic Unit Temperature Sensor

DTC 105: Hydraulic Unit Temperature Sensor

WARNING: This page is about a different car, the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, and 2006 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to ON (II).
  2. Clear the DTC with the HDS.
  3. Test-drive the vehicle.
    NOTE: Drive the vehicle on the road, not on a lift.
  4. Check for DTCs with the HDS.

    Is DTC 105 indicated? 

    YES  -Replace the VSA modulator-control unit (see VSA MODULATOR-CONTROL UNIT REMOVAL AND INSTALLATION ).

    NO  -The system is OK at this time.

scientia non olet · About Mike's Workshop Manuals