Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2000 >> S2000 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Fuel And Emissions Systems) >> How to Set Readiness Codes >> Air Fuel Ratio (A/F) Sensor Monitor and Readiness Code >> Notes

Air Fuel Ratio (A/F) Sensor Monitor and Readiness Code: Notes

WARNING: This page is about a different car, the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, and 2006 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Do not turn the ignition switch off during the procedure.
  • All readiness codes are cleared when the battery is disconnected, if the DTCs have been cleared, or if the ECM is reset with the HDS.
scientia non olet · About Mike's Workshop Manuals