Engine Controls - Removal & Installation & Overhaul: Introduction
NOTE:
For removal, overhaul and installation information on Passport, refer to Rodeo in Isuzu
REMOVAL, OVERHAUL & INSTALLATION article.
CAUTION:
When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in
GENERAL INFORMATION before disconnecting battery.
CAUTION:
Before disconnecting battery, obtain anti-theft code for radio. After battery is reconnected, word CODE will appear on radio display. Enter 5-digit anti-theft code using select buttons and radio will begin working. If code is entered wrong 10 times, leave radio on at least one hour and enter code correctly. Any time radio power is lost, pre-selected radio stations will have to be set. For more information, see owners manual.
Removal, overhaul and installation procedures (when given by manufacturer) are covered in this article. If component removal and installation is primarily an unbolt and bolt-on procedure, only a torque specification may be furnished.