Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 2000 >> Insight >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Continuously Variable Automatic Transmission (CVT)) >> CVT >> DTC Troubleshooting Index >> 2005-2006 Models

2005-2006 Models

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 Honda Insight, 2005 Honda Insight, 2004 Honda Insight, 2003 Honda Insight, and 2002 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Record all freeze data and review General Troubleshooting Information (see GENERAL TROUBLESHOOTING INFORMATION ) before you troubleshoot.
MODELS DESCRIPTION

DTC (1) D Indicator MIL Detection Item Page
P0501 (4-5)(2) Blinks ON Vehicle speed sensor circuit (range/performance) (see DTC P0501: RANGE/PERFORMANCE PROBLEM IN VEHICLE SPEED SENSOR CIRCUIT )
P0502 (4-3)(2) Blinks ON Vehicle speed sensor circuit (no signal input) (see DTC P0502: PROBLEM IN VEHICLE SPEED SENSOR CIRCUIT (NO SIGNAL INPUT) )
P0603 (0-3)(2) Blinks ON Transmission control module (TCM) (see DTC P0603: PROBLEM IN TCM )
P0705 (5-2)(2) Blinks ON Transmission range switch circuit (short to ground) (multiple shift-position input) (see DTC P0705: SHORT IN TRANSMISSION RANGE SWITCH CIRCUIT (MULTIPLE SHIFT-POSITION INPUT) )
P0706 (6-2)(2) Not blinks ON Transmission range switch circuit (open) (see DTC P0706: OPEN IN TRANSMISSION RANGE SWITCH CIRCUIT )
P0716 (34-5)(2) Blinks ON CVT input shaft (drive pulley) speed sensor circuit (range/performance) (see DTC P0716: RANGE/PERFORMANCE PROBLEM IN CVT INPUT SHAFT (DRIVE PULLEY) SPEED SENSOR CIRCUIT )
P0717 (34-3)(2) Blinks ON CVT input shaft (drive pulley) speed sensor circuit (no signal input) (see DTC P0717: PROBLEM IN CVT INPUT SHAFT (DRIVE PULLEY) SPEED SENSOR CIRCUIT (NO SIGNAL INPUT) )
P0721 (35-5)(2) Blinks ON CVT output shaft (driven pulley) speed sensor circuit (range/performance) (see DTC P0721: RANGE/PERFORMANCE PROBLEM IN CVT OUTPUT SHAFT (DRIVEN PULLEY) SPEED SENSOR CIRCUIT )
P0722 (35-3)(2) Blinks ON CVT output shaft (driven pulley) speed sensor circuit (no signal input) (see DTC P0722: PROBLEM IN CVT OUTPUT SHAFT (DRIVEN PULLEY) SPEED SENSOR CIRCUIT (NO SIGNAL INPUT) )
P0726 (11-5)(2) Blinks ON Engine RPM signal input circuit (range/ performance) (see DTC P0726: RANGE/PERFORMANCE PROBLEM IN ENGINE RPM SIGNAL INPUT CIRCUIT )
P0727 (11-3)(2) Blinks ON Engine RPM signal input circuit (no signal input) (see DTC P0727: PROBLEM IN ENGINE RPM SIGNAL INPUT CIRCUIT (NO SIGNAL INPUT) )
NOTE:
(1) The DTC in parenthesis is the Honda code that you will see when you use the HDS. The first number(s) before the - (hyphen) is the flash code the D indicator indicates when the data link connector (DLC) is connected to the HDS, and the HDS in SCS mode.
(2) This code is caused by an electrical circuit problem and cannot be caused by a mechanical problem in the transmission.


NOTE: Record all freeze data and review General Troubleshooting Information (see GENERAL TROUBLESHOOTING INFORMATION ) before you troubleshoot.
MODELS DESCRIPTION

DTC (1) D Indicator MIL Detection Item Page
P0780 (42-2) Blinks ON Shift control system (see DTC P0780: PROBLEM IN SHIFT CONTROL SYSTEM )
P0801 (33-2)(2) Blinks OFF Inhibitor solenoid circuit (see DTC P0801: PROBLEM IN INHIBITOR SOLENOID CIRCUIT )
P0811 (43-2) Blinks ON Start clutch control system (see DTC P0811: PROBLEM IN START CLUTCH CONTROL SYSTEM )
P0962 (38-3)(2) Blinks ON CVT drive pulley pressure control valve circuit low (see DTC P0962: CVT DRIVE PULLEY PRESSURE CONTROL VALVE CIRCUIT LOW VOLTAGE )
P0963 (38-4)(2) Blinks ON CVT drive pulley pressure control valve circuit high (see DTC P0963: CVT DRIVE PULLEY PRESSURE CONTROL VALVE CIRCUIT HIGH VOLTAGE )
P0966 (39-3)(2) Blinks ON CVT driven pulley pressure control valve circuit low (see DTC P0966: CVT DRIVEN PULLEY PRESSURE CONTROL VALVE CIRCUIT LOW VOLTAGE )
P0967 (39-4)(2) Blinks ON CVT driven pulley pressure control valve circuit high (see DTC P0967: CVT DRIVEN PULLEY PRESSURE CONTROL VALVE CIRCUIT HIGH VOLTAGE )
P0970 (32-3)(2) Blinks ON CVT start clutch pressure control valve circuit low (see DTC P0970: CVT START CLUTCH PRESSURE CONTROL VALVE CIRCUIT LOW VOLTAGE )
P0971 (32-4)(2) Blinks ON CVT start clutch pressure control valve circuit high (see DTC P0971: CVT START CLUTCH PRESSURE CONTROL VALVE CIRCUIT HIGH VOLTAGE )
P1655 (37-1)(2) Blinks OFF Transmisison control module (TCM)-to-engine control module (ECM) communication circuit (see DTC P1655: PROBLEM IN TCM-TO-ECM COMMUNICATION LINES )
P1782 (3-11)(2) Blinks ON Throttle position (TP) sensor circuit low (see DTC P1782: TP SENSOR CIRCUIT LOW VOLTAGE )
P1783 (3-12)(2) Blinks ON Throttle position (TP) sensor circuit high (see DTC P1783: TP SENSOR CIRCUIT HIGH VOLTAGE )
P1784 (12-11)(2) Blinks ON Manifold absolute pressure (MAP) sensor circuit low (see DTC P1784: MAP SENSOR CIRCUIT LOW VOLTAGE )
P1785 (12-12)(2) Blinks ON Manifold absolute pressure (MAP) sensor circuit high (see DTC P1785: MAP SENSOR CIRCUIT HIGH VOLTAGE )
P1792 (10-3, 10-4)(2) Blinks OFF Engine coolant temperature (ECT) sensor circuit (see DTC P1792: PROBLEM IN ENGINE COOLANT TEMPERATURE SENSOR CIRCUIT )
P1799 (92-3, 92-4)(2) Blinks OFF Intake air temperature (IAT) sensor circuit (see DTC P1799: PROBLEM IN INTAKE AIR TEMPERATURE SENSOR CIRCUIT )
P1850 (90-1)(2) Blinks OFF Creep aid system solenoid valve A (see DTC P1850: PROBLEM IN CREEP AID SYSTEM SOLENOID VALVE A CIRCUIT )
P1851 (91-1)(2) Blinks OFF Creep aid system solenoid valve B (see DTC PI851: PROBLEM IN CREEP AID SYSTEM SOLENOID VALVE B CIRCUIT )
P2159 (36-9)(2) Blinks ON CVT speed sensor circuit (range/performance) (see DTC P2159: RANGE/PERFORMANCE PROBLEM IN CVT SPEED SENSOR CIRCUIT )
P2160 (36-7)(2) Blinks ON CVT speed sensor circuit (no signal input) (see DTC P2160: PROBLEM IN CVT SPEED SENSOR CIRCUIT (NO SIGNAL INPUT) )
NOTE:
(1) The DTC in parenthesis is the Honda code that you will see when you use the HDS. The first number(s) before the - (hyphen) is the flash code the D indicator indicates when the data link connector (DLC) is connected to the HDS, and the HDS in SCS mode.
(2) This code is caused by an electrical circuit problem and cannot be caused by a mechanical problem in the transmission.
scientia non olet · About Mike's Workshop Manuals