DTC P1163: A/F Sensor (Sensor 1) Slow Response (2000-2001 M/T models)
NOTE:
- If DTC P1162, P1168, and/or P1169 are stored at the same time as DTC P1163, troubleshoot those DTCs first, then recheck for DTC P1163.
- Before you troubleshoot, record all freeze data and review the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION ).
- Reset the ECM with the HDS (see ECM RESET ).
- Start the engine. Hold the engine speed at 3,000 rpm without load (in Park or neutral) until the radiator fan comes on.
- Test-drive at 40-55 mph (64-88 km/h) for about 2 minutes. Try to keep the engine speed between 1,500 to 2,500 rpm. Then decelerate for at least 3 seconds with the throttle completely closed.
- Check for Temporary DTCs or DTCs with the HDS.
Is DTC P1163 indicated?
- YES - Replace the A/F sensor (Sensor 1) (see A/F SENSOR REPLACEMENT .
- NO - Intermittent failure, system is OK at this time. Check for poor connections or loose terminals at the A/F sensor and the ECM.